Jewelry Display Table with Two‑Level Tempered Glass Showcases

Jewelry Display Table with Two‑Level Tempered Glass Showcases

This is EFOUND Display Showcase’s newly crafted Jewelry Display Table with Two‑Level Tempered Glass Showcases (Item No: JA‑145), designed to dominate a luxury retail floor with a striking two‑tier presentation architecture that allows brands to curate hero collections on the elevated upper stage while offering complementary pieces across the expansive lower perimeter.

The table commands attention through its generous proportions — 2 200 mm wide and 1 500 mm deep — establishing a substantial island presence that can anchor an entire showroom layout. The elongated‑octagonal plan introduces chamfered corners that soften the overall geometry, encouraging customers to circulate freely around the full perimeter and engage with the display from multiple vantage points without encountering sharp edges or visual dead zones.

A raised central vitrine rises above the main countertop, enclosed on all sides by angled ultra‑clear tempered glass panels that slope inward to form a shallow pyramid‑like profile. This elevated showcase creates a natural focal hierarchy, drawing the eye upward to the brand’s most prestigious pieces — signature necklaces, limited‑edition brooches, or statement gemstone settings — and framing them against a tall royal‑blue velvet back panel that intensifies colour contrast and adds a sense of depth and occasion.

Below the raised centre, the lower perimeter display wraps the full octagonal circumference at standard counter height. Ultra‑clear tempered glass panels enclose this zone on all outward‑facing sides, providing uninterrupted visibility into a generous display surface where rings, bracelets, earrings, and everyday collection pieces are arranged on cream‑white velvet trays against the same royal‑blue velvet base. The two‑level design effectively doubles the usable display area of a conventional single‑tier table, allowing a complete brand story — from entry‑level accessories to haute joaillerie — to unfold within a single fixture.

All glass panels are fabricated from low‑iron stock, eliminating the faint green tint of standard glass and transmitting over 91 % of visible light. Diamonds appear sharper, gold tones read warmer, and coloured gemstones reveal their full saturation — a critical advantage when presenting merchandise to discerning collectors under controlled showroom lighting.

The structural frame is crafted from #304 stainless steel finished in a warm brushed‑gold PVD coating. The gold tone outlines every glass edge, mullion bar, and horizontal rail, creating a continuous metallic frame that reads as refined jewelry in its own right. The warm gold against the deep blue velvet evokes the classic palette of heritage jewelry houses, instantly communicating prestige and exclusivity.

Six tall tapered legs support the expansive table, each finished in a rich matte‑black lacquer that grounds the composition with a sense of formal strength. The black legs provide a striking tonal contrast to the brushed‑gold upper frame, and each leg is tipped with a brushed‑gold stainless steel foot cap that echoes the upper metalwork and protects premium flooring surfaces. The slender taper creates a visual lightness beneath the substantial display body, preventing the table from appearing heavy despite its generous scale.

Integrated LED lighting is concealed within both the upper and lower vitrine frame rails, casting even, shadow‑free illumination across every display level. The colour temperature is selectable — warm white at 3 000 K envelops gold jewelry in a flattering amber glow, while cool white at 6 000 K maximises the fire and brilliance of diamonds and platinum. The dual‑level lighting architecture ensures that both the hero pieces above and the perimeter collection below receive equal illumination quality, maintaining visual consistency across the entire table.

If you are looking for a jewelry display table that combines a grand two‑level presentation, a dramatic black‑and‑gold frame, expansive panoramic glass, and rich royal‑blue velvet interiors in one commanding flagship centerpiece, contact EFOUND today!

Material and Craft Details

Brushed‑Gold PVD‑Coated #304 Stainless Steel Frame

The entire upper structural frame — including the raised central vitrine rail, lower perimeter rail, mullion bars, and foot caps — is fabricated from commercial‑grade #304 stainless steel, selected for its outstanding corrosion resistance, structural integrity, and suitability for precision PVD finishing. Each component is laser‑cut, mitre‑welded, and hand‑ground to seamless joints before entering the PVD chamber, where multiple layers of titanium‑nitride are deposited at the molecular level. The resulting brushed‑gold surface is significantly harder than traditional electroplating, resistant to fingerprints and everyday cleaning agents, and retains its warm lustre through years of high‑traffic commercial use without re‑polishing.

Ultra‑Clear Low‑Iron Tempered Glass Panels

Every glass panel — across both the upper angled vitrine and the lower perimeter showcase — is cut from low‑iron float stock, which dramatically reduces the ferrous‑oxide content responsible for the greenish cast found in standard glass. After precision cutting to the octagonal geometry and angled profiles, each panel undergoes thermal tempering at approximately 620 °C followed by rapid air quenching, producing a surface compression that makes the glass four to five times stronger than annealed glass and ensures it fractures into small, blunt granules rather than dangerous shards. The finished panels transmit over 91 % of visible light, presenting every gemstone and precious metal in its truest colour.

Matte‑Black Lacquer Tapered Legs

Six tapered legs are crafted from high‑density fiberboard and finished in a multi‑layer matte‑black lacquer. A catalysed primer‑sealer coat is applied first, followed by two coats of pigmented polyurethane lacquer hand‑sanded between applications, and sealed with a final matte clear‑coat that provides a velvety, fingerprint‑resistant surface. The deep black tone anchors the table visually and provides a bold tonal counterpoint to the warm gold upper frame.

Brushed‑Gold Stainless Steel Foot Caps

Each leg is tipped with a brushed‑gold #304 stainless steel foot cap that mirrors the upper frame finish, creating a cohesive metallic thread from top to bottom. The caps are precision‑fitted and include a protective inner pad that safeguards marble, hardwood, and tile flooring against scratches and pressure marks.

Royal‑Blue Velvet Interior

The interior display surfaces of both the upper and lower vitrines are upholstered in a deep royal‑blue short‑pile velvet with a dense backing that prevents pile crush. The saturated blue is deliberately chosen to create high optical contrast with gold, silver, and diamond jewelry, amplifying brilliance and three‑dimensionality. The tall central back panel in the upper vitrine doubles as both a visual backdrop and a spatial divider, lending depth and drama to the hero display.

Cream‑White Velvet Display Trays

Individual display trays are upholstered in premium cream‑white velvet, offering a neutral, luminous stage for each jewelry piece. The pale trays stand out against the royal‑blue base, guiding the customer’s eye to the merchandise. Each tray is shaped and angled for specific jewelry categories and lifts out without tools for cleaning, repositioning, or seasonal replacement.

Dual‑Level Integrated LED Lighting System

High‑efficiency LED modules are surface‑mounted within recessed aluminium channels concealed inside both the upper and lower frame rails. Constant‑current drivers deliver flicker‑free illumination with a colour‑rendering index (CRI) above 90, faithfully reproducing the spectral nuances of diamonds, gold, and coloured gemstones on both display levels. Warm (3 000 K) and cool (6 000 K) settings are independently toggled for each level via discreet switches accessible from the rear service panel, and the rated lamp life exceeds 50 000 hours.

Why Choose Us

Since its founding, EFOUND Display Showcase has served the world’s most discerning jewelry brands — not merely as a manufacturer, but as a partner in spatial storytelling. With a 12‑person professional design team spanning space design, R&D, lighting, soft furnishing, and display expertise, EFOUND delivers complete environments, not just furniture.

One‑stop whole store solutions — from concept rendering to factory production to on‑site installation. 24‑hour global one‑on‑one service — because your timeline is our timeline. International quality certified — ISO, TUV, and professional export packaging meeting international fumigation standards. Fast delivery — standard series ships within 7–15 days. Professional transportation — by sea, air, or railway, crated and insured.